1. How does the tyre change into diesel oil?
Firstly,the catalyzer which our company collocate ourselves need to be added in the reactor,
and the catalyzer will be heated together with the tyres. the oil gas will be gotten.
Then the oil gas will go through the cooling process, the oil will be cooled in the oil tank.
(I will send you a picture to make it clear)
Then the oil need to be distillated in the distillation equipment. after distillation,
you will get the oil which can be modulated into
diesel oil by adding some stabilizer
( the stabilizer is just like a prescription which we can make up only.
it 's business secret )
Then the diesel oil will be gotten successfully.
2. What is the density of this purified diesel oil?
0.87
3. How much coal and electricity is consumed per hour?
400kg of coal for 5 tons tyre and 13kw-15kw per hour.
4. How many hours for both machine process?
8 hours for pyrolysis and we will despoly 2 sets of pyrolysis equipment.
At the same time, you will purify 10 tons of tyres.
Then all the oil from the pyrolysis equipments you get can be distillated
in the distillation equipment.
( two pyrolysis equipments just can meet one distillation equipment's need)
5. what about 50% purified and 50% standard oil?
I have asked my boss very seriously about this question,and he said our equipment can
meet your request. You can combine 50% purified oil with 50% standard oil.
Our engineer will tell you more details personally or on phone or by video on line.
and I can promise you won't be complained by your customers.
6. How much land does it require?
400 square meters for one pyrolysis equipment.
600 square meters for two pyrolysis euqipments.
200 square meters for distillation equipment.
7. What advantages does your products have?
Little pollution ( without waste water. waste gas will be heated in the reactor.
the smoke will be cleaned by the smoke-sooting system).Little noise but a little smell.
I don't think you can build it in the center of your city.
You need to ask your government first and our engineers need to investigate in your local place.
8. What's the method for installing in your areas?
Well , our operators and engineers( only one or two persons will go to your place need to go to your place to install these equipments for you.
But you need to afford all the expenses including labour cost (about $50-$70 per day), board and lodging and pay for the round trip.